Frustrating as it is, carp fishing is awesome. Carp are really good at sucking in and blowing out suspicious baits. It’s such an excitement to see the whole action in a fraction of a second as you hang on for dear life while the reel is trembling with a loud noise.
Carp happily devour on the surface as long as you keep the pellets, biscuits, chic peas, bread, and re-hydrated corn coming in, and these are inexpensive baits as well. Just attach them to the hooks, most preferably the bread. Have the biscuits softened by dipping it in the water for about 2 minutes, then, place them in a sealed sandwich bag for about an hour. Since different brands have different textures, just experiment to know which is firm enough to cast. Another way to hook baits is super gluing the pellet into the shank.
Once they get into feeding, let them feel comfortable around the bait. This gives more opportunity for the fisherman since they begin to not feel picky. This tactic can be useful for zig rigs.
As soon as they’re feeding, cast the bait but make sure not to drop the bait directly onto the feeding carp. Cast away from the feeding area then slowly draw it in position. While the bait is till hanging, keep the food coming in so as to keep the carp from going away.
How to Set-Up?
• Use a hair rig to increase your chance of catching. As carp taste food first, if they don’t like the taste, they won’t come near it.
• You may also use a Spider Line, 50 lbs test, then use a leader material that fits the situation.
• Thread the bait on the baiting needle and hook the hair loop. You may also use foam dipped in a flavor as this enhances the attractiveness of the bait.
• Also make a baiting needle by just straightening a long shank hook. Slide the bait on the shank, then slide the bait from the needle onto the hair.
• Using a float is also an advantage because it adds weight for further distancing and the location is easily identified.
• Don’t forget the controller float rig. A leader can be used which is attached to the swivel to its mainline of at least 3 feet length with a 10lbs Drennan double strength. A low diameter mono will do just as long as it floats well enough for visibility.
As experts say, it is not the bait that catches the carp but the method in which the bait is introduced. Pre-bait everyday, in one spot for a few days. This makes the carp think that there is a regular source of food for them and by “word of mouth” there’ll soon be a school of fish around. Just be patient and it will all work.
Showing posts with label fishing. Show all posts
Showing posts with label fishing. Show all posts
Wednesday, December 23, 2009
Alaska's King Salmon - Tackle And Technique
The Alaska King Salmon is the official state fish and ultimate prize for any fisherman looking for the excitement of landing a big one. King Salmon in the world famous Kenai River are plentiful and huge. Sport fishermen in the Kenai have caught trophy salmon weighing nearly 100-pounds, and it’s not unusual for anglers to haul in 40 and 50 pounders. Thousands of people travel to the Kenai River and, with a licensed river guide, pursue its most prized bounty-- the King.
What do you use for bait? There are a few types of rigs that are best for attracting Alaska King Salmon. Spin-N-Glows, Vibrex Spinners, and plugs are three effective lures that usually provide optimum results. Two common fishing techniques used on guide boats on the Kenai are back trolling and drifting; while a third and relatively new method called back bouncing is also proving to be effective.
Back trolling usually incorporates Spin-N-Glows and salmon eggs or plugs. Some other effective lures for back trolling are Magnum Wiggle Worts, Flashtrap Spinners, Tadpollys, Kwikfish and Flatfish. In addition to the lure, you may also, depending upon the current, depth of the water, and location on the river, utilize divers, trolling weights, and diving lures. Baits that move erratically and rotate, especially those that create the illusion of a water creature in distress, will help attract salmon.
When back trolling, the guide has the boat work against the current, running the motor at the same speed or a bit slower than the river. This helps hold the boat in the same position on or to move slowly down the river. The boat should be moving downstream slower than the current while the lures are downstream ahead of the boat. Usually the bait moves close to the bottom of the river with a diver or weight attached 18 inches away from it to allow for proper depth. You’ll know you’ve got a King Salmon on your line when the rod goes down and stays down.
Drifting is similar to back trolling except the bait is allowed to gently bounce off the bottom of the river while the boat drifts with the current. Weights are used to keep the line at the correct depth. This technique is difficult to master since it’s not necessarily east to differentiate between a fish taking the bait and your line hitting off the bottom. A pause in the movement of the line often indicates a hit.
With back bouncing, the bait is bounced off the bottom as the boat is slowly backed over a hole. Sink-N-Glows, a Vibrex spinner or similar lures when properly weighted often yield good results. When fishing, if you feel a tug set the hook chances are there is a salmon there.
If using a plug, you’ll want to utilize K-15’s or K-16’s - you need something large. Divers work well to get the plug to the right depth and colorful, gaudy colors are recommended due to their ability to attract attention.
If you’re planning on fishing the Kenai River and can’t locate the right type of lure at home, don’t worry. Some of these items may not be accessible in your region of the country but bait and tackle shops throughout the Kenai have no lack of Spin-N-Glows, Vibrex spinners, Tadpollys, Kwikfish and more.
If you elect to book your fishing trip through a licensed guide, you’ll find that their knowledge, skill, and supplies will result in a less stressful and a more productive trip. When you go fishing for the Alaska King Salmon you want to exploit every opportunity you have to make your limit, enjoying some of the best fishing on this earth.
What do you use for bait? There are a few types of rigs that are best for attracting Alaska King Salmon. Spin-N-Glows, Vibrex Spinners, and plugs are three effective lures that usually provide optimum results. Two common fishing techniques used on guide boats on the Kenai are back trolling and drifting; while a third and relatively new method called back bouncing is also proving to be effective.
Back trolling usually incorporates Spin-N-Glows and salmon eggs or plugs. Some other effective lures for back trolling are Magnum Wiggle Worts, Flashtrap Spinners, Tadpollys, Kwikfish and Flatfish. In addition to the lure, you may also, depending upon the current, depth of the water, and location on the river, utilize divers, trolling weights, and diving lures. Baits that move erratically and rotate, especially those that create the illusion of a water creature in distress, will help attract salmon.
When back trolling, the guide has the boat work against the current, running the motor at the same speed or a bit slower than the river. This helps hold the boat in the same position on or to move slowly down the river. The boat should be moving downstream slower than the current while the lures are downstream ahead of the boat. Usually the bait moves close to the bottom of the river with a diver or weight attached 18 inches away from it to allow for proper depth. You’ll know you’ve got a King Salmon on your line when the rod goes down and stays down.
Drifting is similar to back trolling except the bait is allowed to gently bounce off the bottom of the river while the boat drifts with the current. Weights are used to keep the line at the correct depth. This technique is difficult to master since it’s not necessarily east to differentiate between a fish taking the bait and your line hitting off the bottom. A pause in the movement of the line often indicates a hit.
With back bouncing, the bait is bounced off the bottom as the boat is slowly backed over a hole. Sink-N-Glows, a Vibrex spinner or similar lures when properly weighted often yield good results. When fishing, if you feel a tug set the hook chances are there is a salmon there.
If using a plug, you’ll want to utilize K-15’s or K-16’s - you need something large. Divers work well to get the plug to the right depth and colorful, gaudy colors are recommended due to their ability to attract attention.
If you’re planning on fishing the Kenai River and can’t locate the right type of lure at home, don’t worry. Some of these items may not be accessible in your region of the country but bait and tackle shops throughout the Kenai have no lack of Spin-N-Glows, Vibrex spinners, Tadpollys, Kwikfish and more.
If you elect to book your fishing trip through a licensed guide, you’ll find that their knowledge, skill, and supplies will result in a less stressful and a more productive trip. When you go fishing for the Alaska King Salmon you want to exploit every opportunity you have to make your limit, enjoying some of the best fishing on this earth.
5 Useful Tips On Trout Fishing
In fishing, trout are one of the favorite “fishing friends” of most anglers. These crafty fish are abundant anywhere. The native habitat of these crafty fish depends on the type of trout.
For brook trout, the native habitat includes the territory from Labrador westward to the Saskatchewan, while the rainbow trout is a native of the Pacific slope from Alaska to California.
On the other hand, brown trout has found its way into the waters of every state in the United States except Florida, Arkansas, Kansas, Kentucky, Louisiana, Mississippi, Missouri, North Dakota, Oklahoma, and Texas. It has been reported in the waters of some of these states, but according to conservation officials, no authentic reports have been received. It is also found in many parts of Canada.
In trout fishing, there are some factors that need to be considered in order to have a successful catch.
1. For trout fishing, the leader should not be greased. It will not sink far enough to cause any difficulty when picking the line and lure from the water, but if it is allowed to float; it will cast a shadow on the bottom of the stream which may scare the trout.
2. The trout is one of the fishes that are usually secured through the use of the dry fly. For trout, the current as well as the pools should be fished. It may sometimes be a bit difficult to keep the fly from sinking or dragging because of the various conditions of the current, but this is a matter that the angler will have to figure out for himself.
3. It is not good practice when fishing for trout to fish directly upstream so the flies, line, and leader will float directly over fish. The fisherman should make the cast from one side of the stream so the fly will only float over the fish.
4. It is important to make the first cast the best. A feeding trout will usually strike the first lure presented if it is cast so that it will float over his private domain. The angler should never fail to fish the lower end of the pool first even if the trout are rising in the middle or upper end.
5. Trout are sometimes very moody or selective and will try the patience of any angler; hence, possibly a fly with less hackle will do the trick or it may be necessary to use a spent-wing fly or a fan wing.
Indeed, catching trout fishes can be lots of fun. The anglers just have to remember these tips in order to have a happy catch.
For brook trout, the native habitat includes the territory from Labrador westward to the Saskatchewan, while the rainbow trout is a native of the Pacific slope from Alaska to California.
On the other hand, brown trout has found its way into the waters of every state in the United States except Florida, Arkansas, Kansas, Kentucky, Louisiana, Mississippi, Missouri, North Dakota, Oklahoma, and Texas. It has been reported in the waters of some of these states, but according to conservation officials, no authentic reports have been received. It is also found in many parts of Canada.
In trout fishing, there are some factors that need to be considered in order to have a successful catch.
1. For trout fishing, the leader should not be greased. It will not sink far enough to cause any difficulty when picking the line and lure from the water, but if it is allowed to float; it will cast a shadow on the bottom of the stream which may scare the trout.
2. The trout is one of the fishes that are usually secured through the use of the dry fly. For trout, the current as well as the pools should be fished. It may sometimes be a bit difficult to keep the fly from sinking or dragging because of the various conditions of the current, but this is a matter that the angler will have to figure out for himself.
3. It is not good practice when fishing for trout to fish directly upstream so the flies, line, and leader will float directly over fish. The fisherman should make the cast from one side of the stream so the fly will only float over the fish.
4. It is important to make the first cast the best. A feeding trout will usually strike the first lure presented if it is cast so that it will float over his private domain. The angler should never fail to fish the lower end of the pool first even if the trout are rising in the middle or upper end.
5. Trout are sometimes very moody or selective and will try the patience of any angler; hence, possibly a fly with less hackle will do the trick or it may be necessary to use a spent-wing fly or a fan wing.
Indeed, catching trout fishes can be lots of fun. The anglers just have to remember these tips in order to have a happy catch.
Subscribe to:
Posts (Atom)